UniFi UAP-AC nanoHD – 5 PACK (UAP-nanoHD-5)

$0.00

Technical specification
Dimensions 160 x 160 x 32.65 mm (6.30 x 6.30 x 1.29″)
Weight 300 g (10.6 oz)
Weight With Mounting Kits 830 g (1.83 lb)
Networking Interface (1) 10/100/1000 Ethernet Port
Buttons Reset
Power Method 802.3af PoE
Power Supply UniFi Switch (PoE)
Power Save Supported
Beamforming Supported
Maximum Power Consumption 10.5W
Supported Voltage Range 44 to 57VDC
TX Power 2.4 GHz: 23 dBm
5 GHz: 26 dBm
MIMO 2.4 GHz: 2×2
5 GHz: 4×4
Radio rates 2.4 GHz: 300 Mbps
5 GHz: 1733 Mbps
Antennas 2.4 GHz: (2) Single-Port, Single-Polarity Antennas, 2.8 dBi each
5 GHz: (2) Single-Port, Dual-Polarity Antennas, 3 dBi each
Wi-Fi Standards 802.11 a/b/g/n/ac/ac-wave2
Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
802.11w/PMF
BSSID 8 per Radio
Mounting Wall/Ceiling (Kits Included)
Operating Temperature -10 to 70° C (14 to 158° F)
Operating Humidity 5 to 95% Noncondensing
Certifications CE, FCC, IC
Advanced Traffic Management
VLAN 802.1Q
Advanced QoS Per-User Rate Limiting
Guest Traffic Isolation Supported
WMM Voice, Video, Best Effort, and Background
Concurrent Clients 200+
Supported Data Rates (Mbps)
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n 6.5 Mbps to 450 Mbps (MCS0 – MCS23, HT 20/40)
802.11ac 6.5 Mbps to 1.7 Gbps (MCS0 – MCS9 NSS1/2/3/4, VHT 20/40/80)
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps

Description

Description

UBNT-UAP-NANOHD – 5 pack
UBNT-UniFi-nanoHD
Ubiquiti UniFi UAP NANOHD – 5 pack
802.11AC Wave 2 MU-MIMO (Multi-User, Multiple Input, Multiple Output) technology allows a Wave 2 AP to communicate with multiple clients at the same time – significantly increasing multi-user throughput and overall user experience.

MU-MIMO Assuming the same conditions, a Wave 2 AP provides up to 75% improvement* overall over a Wave 1 AP. This improvement increases wireless performance and/or serves more clients at the same performance level.

4×4 Spatial Streams At any single time, a Wave 2 AP can communicate with the following MU-MIMO clients:

four 1×1 clients
two 2×2 clients
one 2×2 client and two 1×1 clients
one 3×3 client and one 1×1 client

A 4×4 Wave 2 AP delivers up to 33% greater performance than a Wave 1 AP that is 3×3 in both radio bands.

The UniFi nanoHD AP is the UniFi 802.11ac Wave 2 AP with the smallest form factor. Combining the performance increases from MU-MIMO technology and the use of 4×4 spatial streams, the UniFi nanoHD AP delivers up to 125% greater performance than a typical Wave 1 AP.

Low-Profile Mounting: The UniFi nanoHD AP’s low-profile ceiling mount (sold separately) allows you to seamlessly integrate the AP into its environment.

Designed for Seamless Integration: Optional skins (sold separately) allow the UniFi nanoHD AP to discreetly blend into its setting. Choose from the following designs:
UBNT-UniFi-nanoHD

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “UniFi UAP-AC nanoHD – 5 PACK (UAP-nanoHD-5)”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames.Consequat net

Vestibulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames.Consequat netus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac vestibulum amet elit